adjusted circuit

【电】可变电路

双语例句

This kind of circuit is so flexible that the capacitor's size can be adjusted according to the circuit, thus it has large detecting-range. 电路应用灵活，可根据电容大小调整电路参数，测量范围较大。

Pulse signal of gear wheel rotating generated by magnetoelectricity sensor was adjusted into rectangular pulse by adjusting circuit. 调理电路将磁电式传感器产生的齿轮旋转逐齿信号调为矩形脉冲。

They are designed to be mounted directly onto the circuit board and adjusted only when the circuit is built. 他们的目的是直接安装到电路板和调整，只有当电路的基础。

Usually, it can be adjusted to sync location by the circuit. When the error is 180 °, it may lead to false sync. 通常系统能调整到协调位置，而当误差角为180°时，会出现假同步。

During the arc time, changing rate of current could be adjusted by modulating the parameter of the control circuit, which ensures the proper output power of the arc. 在燃弧阶段，调节控制回路参数，控制燃弧电流的变化速度，保证充足的燃弧能量。

The factor can be adjusted to some extent by varying the reactance which has been connected to the LV side of the testing circuit to lower the capacity of the circuit. 试验时通常在变压器低压侧并联电抗器以降低试验系统容量，调节并联电抗器补偿度可在一定范围内调节容升因子。

A programmable high voltage pulse power supply based on Pulse Frequency Modulation ( PFM) control strategy is proposed in this paper. The output voltage is adjusted by a PFM converter circuit, and the width of high voltage pulse is controlled by a micro-controller. 介绍了一种基于脉冲频率调制（PulseFrequencyModulation，简称PFM）技术的数控高压脉冲电源。

A threshold adjusted technique for low-voltage CMOS ***og circuit is presented. 介绍了一种用于低电压CMOS模拟集成电路设计的阈值调节思想。

The rising-and falling-times of pulses are adjusted through changing the charging and discharging currents of the synthesizing pulse circuit. 而脉冲的上升/下降时间则通过调整脉冲合成电路的充放电电流来控制。

The program's result show that using database technology to handle the circuit diagram can adjust every element easily, and it can be adjusted discretionarily later after the circuit diagram is saved. 程序结果表明，使用数据库技术来处理电路图，可以很方便地对各个元器件进行调整，而且保存后，以后还可以任意调整。

First of all, based on theoretical ***ysis, we have designed the hardware circuit of every module, and then through the experimental test, we slightly adjusted the circuit parameters to make it a better simulation of power line communication environment. 首先在理论分析基础上设计了各模块硬件电路，然后通过实验测试，对电路参数做细微调整，使其更好的模拟电力线通信环境。

Due to engine signal changing, so the circuit of the signal processing needs to use multi-stage proportional amplifier, so that the signal is adjusted to a range suitable for the master chip processing, then passes to the next level circuit processing. 由于发动机信号变化多端，所以在前端对信号处理部分的电路需使用多级比例放大器，将信号调整到一个适合主控芯片处理的范围内，再传递到下一级电路处理。

The amplitude of sinusoidal signal can be adjusted automatically, RF power and the temperature of lesions and damaged parts of a body can be precisely measured, and the impedance of a body is derived. Fourthly, RF power amplifier circuit is designed. 实现正弦信号幅度自动调节、射频功率的测量、病灶毁损部位温度的测量和人体阻抗的计算等功能。第四，设计射频功率放大电路。